DAE Error -9101:Files aren't as big as the number of bytes requested to be copied
DAE Error -9100:Attempt made to start a new file copy while already in progress
DAE Error -9099:Operating System too old for this version of DAE. Contact your Apple dealer for an update.
DAE Error -9098:Not enough memory reserved for DAE with the given hardware configurations. DAE DOES launch.
DAE Error -9097:Unable to launch DAE because of a memory error. There may not be enough memory for DAE. Check that combined memory requirements of DAE client Application and DAE does not exceed available memory. Application will now most likely quit.
DAE Error -9096:Please select a peripheral for all cards. DAE can not be acquired without a peripheral being selected.
DAE Error -9095:Audio file is not on the proper disk SCSI chain.
DAE Error -9094:Under run error from the DSP. This can be caused by another card, such as a Video or QuickTime acceleration card, doing large transfers on the bus.
DAE Error -9093:Under run error from the DSP. This can be caused by another card, such as a Video or QuickTime acceleration card, doing large transfers on the bus.
DAE Error -9092:Under run error from the DSP. This can be caused by another card, such as a Video or QuickTime acceleration card, doing large transfers on the bus.
DAE Error -9091:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9090:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9089:Unable to select a deck because the hardware is allocated or not available.
DAE Error -9088:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9087:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9086:Automation events are too dense. Reduce the density of the automation data or if you need the density bounce the tracks to disk, replace them with bounced files, and delete automation events.
DAE Error -9085:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9084:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9083:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9082:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9081:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9080:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9079:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9078:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9077:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9076:This may be caused by trying to loop a selection that is too short.
DAE Error -9075:Audio playlist is too dense for silence play list.
DAE Error -9074:Edit information too dense. Try bouncing tracks with many edits to disk and then replacing the edits with bounced file.
DAE Error -9073:Your disk was too slow to continue play back with this buffer size. Try increasing the DAE buffer size. Also, optimizing your disk and turning off File Sharing, AppleTalk and other unnecessary INITs can help.
DAE Error -9072:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9071:The DigiSystem INIT is either too old or improperly installed. Try reinstalling from your Master Disks and restarting your machine.
DAE Error -9070:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9069:DAE requires at least a 68020 processor to run. This machine is not supported.
DAE Error -9068:DAE will not run if virtual memory is turned on. Go to the Memory control panel and turn off virtual memory. Then restart your computer.
DAE Error -9067:DAE requires System 7 or higher. Contact your Apple dealer for an update.
DAE Error -9066:DAE runs only in 32 bit mode. Go to the Memory control panel and set it to 32 bit mode. Then restart the computer.
DAE Error -9065:Unable to find DAE application in the DAE Folder. Reinstall DAE from your Master Disks.
DAE Error -9064:Unable to find "DAE Folder" in the system folder. Reinstall DAE from your Master Disks.
DAE Error -9063:Playback got out of sync with timecode location.
DAE Error -9062:The DigiSystem INIT is either missing or incorrectly installed. Please reinstall it from your Master Disks. It belongs in the Extensions folder inside your System Folder.
DAE Error -9061:Tried to scrub in a non-scrub mode or on a SysAxe channel. Contact your DAE developer.
DAE Error -9060:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9059:This configuration does not support multiple punch in and out.
DAE Error -9058:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9057:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9056:This version of DAE is too new to run with this Application or configuration. Contact Digidesign for an update.
DAE Error -9055:This version of DAE is too old to run with this Application or configuration. Contact Digidesign for an update.
DAE Error -9054:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9053:There was an error while trying to read your disk. This may have happened because you are trying to loop to short a section. Try playback again.
DAE Error -9052:This hardware configuration does no support the requested sample rate. Please contact your DAE developer.
DAE Error -9051:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9050:Trying to record on scrub channel. Contact your DAE developer.
DAE Error -9049:Audio file not opened when trying to access samples.
DAE Error -9048:Missing DAE resource or timeout occurred while waiting for DAE to launch. Try reinstalling DAE from your original disks.
DAE Error -9047:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9046:Timeout occurred while waiting for DAE to become the active application.
DAE Error -9045:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9044:No drives connected or mounted on the SysAxe axe. Please check that your drives are properly connected and turned on before starting your computer.
DAE Error -9043:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9042:DAE encountered an error when trying to communicate with the SysAxe.
DAE Error -9041:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9040:DAE encountered an error when trying to communicate with A/Rose. A/Rose may be corrupted. Quit and try reinstalling the A/Rose INIT.
DAE Error -9039:DAE encountered an error when trying to communicate with A/Rose. A/Rose may be corrupted. Quit and try reinstalling the A/Rose INIT.
DAE Error -9038:DAE encountered an error when trying to communicate with the SysAxe.
DAE Error -9037:No reply from the SysAxe. Card appears to be dead. Check that the correct SysAxe INIT and A/Rose INIT are installed.
DAE Error -9036:DAE encountered an error when trying to communicate with the SysAxe.
DAE Error -9035:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9034:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9033:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9032:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9031:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9030:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9029:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
Session was unable to acquire the DAE resources necessary to run. This could mean that you have no Audio Card or that it is in use by another application. On a Power Mac it could mean the Session Mix Extension is missing.
DAE Error -9027:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9026:Please Call Digidesign and report this Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9025:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9024:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9023:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9022:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9021:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9020:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9019:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9018:Unable to allocate Session 8 card or allocate extents in a file.
DAE Error -9017:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9016:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9015:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9014:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9013:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9012:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9011:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9010:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9009:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9008:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9007:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9006:DAE was unable to allocate memory. Memory is low.
DAE Error -9005:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9004:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9003:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9002:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
DAE Error -9001:Please Call Digidesign and report this error. Note the error number and which DAE application you were running. Thanks!
